FOR OPEN-CIRCUIT COOLING SYSTEMS

Scheme of chemical water treatment for open-circuit cooling system Cooling systems in circulations are the type where cooling water is taken from the immediate environment (from the water stream, lake or any other kind of watercourse). The water turns its path only once in the cooling system and then it comes back. In the past […]

CLOSED COOLING TOWERS

EVAPORATIVE CONDENSER Description Evaporative condenser consists of the case made of reinforced polyester or galvanized metal sheets, pipe register, water drop eliminator made of PP material, an axial/ radial fan with an electromotor drive, distribution and spraying system of cooling water and circulation pump of the secondary part of the system. The pipe system is […]

FOR CLOSED-CIRCUIT COOLING SYSTEMS

System water is dense and full of impurities which enter the water circulation through cooling towers, where water is in direct with ambient air. The water temperature is often between 25 and 50?C. Such conditions are ideal for formation of algae, fungi and bacteria. Bio films and accumulated algae reduce heat exchange and prevent resistance […]

OPEN CIRCUIT COOLING SYSTEM

Cooling systems in circulation are the type of systems where cooling water is taken from immediate environment (from the lake, river or other type of watercourse). The water turns its path only once in the cooling process and then it comes back. In the past this was the cheapest way of cooling in locations which […]

DUAL-CIRCUIT WATER SYSTEM TREATMENT WITH CLOSED COLLING SYSTEM

In the event there are several users which needed to be cooled down and the needs for cooling water flow and cooling capacity can change through time, a dual-circuit cooling circulation system is the optimum solution. The pumps which ensure water circulation in the circuit of users, also called primary circuit, pump cold water from […]

SINGLE-CIRCUIT COOLING SYSTEM WITH CLOSED-LOOP WATER CIRCULATION

Single-circuit cooling system is used to cool down process and devices which have within a certain period of time a constant cooling water flow. Normally such cooling systems are used for production lines which function with ON/OFF regime as a whole. Pumps, which ensure water flow, pump cold water from the cooling water pool and […]